The Ram Axial Solid irons completed third general in MyGolfSpy’s Participant’s Iron testing this yr. It got here as extra of a shock than it in all probability ought to have.
Positive, Ram and its not too long ago resurrected stablemates MacGregor, Teardrop and Ben Hogan have some attention-grabbing issues occurring. That Ram got here up with a wonderful performing cast-iron is to its credit score. However it’s additionally vital to notice that the participant’s Iron class is one the place smaller manufacturers can compete evenly with the so-called Large 5 of Callaway, Titleist, TaylorMade, PING and COBRA.
Smaller manufacturers have historically carried out very properly within the participant’s Iron class. In 2023, the Takomo TG 301 CB completed third general. The yr earlier than, the New Stage 623 CB completed first. Ever since direct-to-consumer turned a factor, entries from manufacturers equivalent to Ben Hogan, Sub 70, New Stage and Scott Golf have carried out surprisingly properly.
We’re speaking about single-piece forgings right here. The general expertise stage isn’t excessive so there may be, to a level, a extra stage enjoying discipline. However nonetheless, the Ram Axial Solid did shock us.
Due to this fact, it appears worthwhile to dive deeper and see simply how the Axial got here to be.
Ram Axial Solid: A golden Ram return
We’ve coated the Ram Golf story in nice element earlier than, nevertheless it’s value a fast recap.
Ram Golf obtained its begin post-World Warfare II in Chicago. Brothers Lyle, Al and Jim Hansberger constructed Ram right into a stable area of interest firm making leisure and pro-level gear. Ram can also be credited with creating and promoting golf’s first Surlyn-covered golf ball, the Ram 3-D.
The Hansberger brothers bought Ram to Colgate-Palmolive in 1974 however purchased it again six years later at a cut price worth. The ‘80s have been Ram’s heyday with Tom Watson on workers and the Zebra putter dominating on Tour and at retail. By the top of the ‘90s, nevertheless, the trade was altering and the small household enterprise was struggling. The Hansbergers cashed out on the proper time, promoting the model to keen entrepreneur Rudy Slucker. A collection of bankruptcies and possession modifications later, Ram was an affordable home model at Sports activities Authority.
When Sports activities Authority went below in 2016, DICK’S scooped up all its property. 4 years later, Simon Millington and Sports activities Manufacturers, Inc., purchased the Ram model from DICK’S, together with Zebra, MacGregor and Teardrop. During the last three years, Millington has resurrected every model again as a direct-to-consumer providing.
To begin, Ram was an introductory model with low-cost, open-mold golf equipment and equipment. Millington’s plan all alongside, nevertheless, has been to transition away from open mildew golf equipment and supply prospects with authentic designs at DTC pricing.
Now that we’re updated, let’s take a look at the Ram Axial Solid.
An under-$500 shock
“I like the actual fact we shocked individuals with it,” Millington tells MyGolfSpy. “I imply, it’s not a blind take a look at. Your testers knew once they have been hitting a Titleist, a Callaway or us.”
When lots of our testers heard the identify Ram, they thought it was a bizarre collaboration with Dodge pickups. After the take a look at, nevertheless, many left with a change of coronary heart whereas acknowledging its efficiency.
“I by no means thought Ram would make this good of an iron,” one tester instructed us.
“I appreciated it so much and I wasn’t anticipating to,” mentioned one other. “It has an interesting design and is constant.”
“We’re a golf household and we take a look at all the things ourselves,” says Millington. “We knew it was an ideal membership so we weren’t shocked it did properly. We’d have been upset if we didn’t win finest worth. That may’ve meant we have been doing one thing mistaken.”
That is the half the place it’s vital to emphasize the Ram Axial Solid is, actually, an authentic design by Millington. It’s not an open mildew neither is it an open mannequin barely modified and stamped with the Ram brand.
“I’ve been within the golf trade for 40 years and I had a good suggestion of what I wished,” explains Millington. “Sadly, I draw like I’m a three-year-old youngster.”
To make the Axial a actuality, Millington turned to 2 seasoned professionals: former Callaway/Odyssey designer Larry Tang and his full-time membership designer Gavin Wallin, previously of Adams.
The Ram Axial journey
You could not know the identify Larry Tang. Nevertheless, in case you’ve ever rolled an Odyssey 2-Ball putter, you’re acquainted with his work. Tang is an industrial designer with a specialty in golf gear. He’s listed on greater than 150 design patents for merchandise together with Large Bertha irons and drivers, Epic metalwoods and Apex irons and hybrids.
“I got here up with the concept however Larry got here in and did all of the intelligent stuff,” says Millington. “He tidied up the weighting and all of the tech specs.”
It took about eight months to go from Millington’s authentic sketch to the ultimate product, a single piece 1020 carbon metal forging.
“The tech is considerably restricted in that kind of forging,” explains Millington. “The way it appeals to the attention is as vital as the way it performs. You are able to do slightly bit with weighting and issues like that nevertheless it’s designed for good gamers.
“ participant desires to place the membership down and say, ‘Ohh, I moderately like that.’”
Specs ‘n’ such
In case you test the info, the actual fact the Ram Axial Solid completed second general in distance needs to be a shock. The Axial Solid 7-iron was the longest within the take a look at with 166.2 yards of carry and 169.9 yards whole. It’s additionally the strongest lofted 7-iron within the take a look at at 31 levels. By comparability, the second longest 7-iron, the COBRA KING Tour, checked in at 32 levels. The shortest 7-iron within the take a look at was the Mizuno JPX923 Tour (the JPX925 irons hadn’t been launched on the time of the take a look at) with a loft of 34 levels.
So, sure, loft and distance are joined on the hip. Moreover, 31 levels is extra consistent with what one would count on within the participant’s distance class. That’s in all probability one of the best ways to take a look at the Ram Axial Solid. From a launch, spin and descent angle perspective, it’s a participant’s distance iron dressed up as a single-piece forging.
Take take a look at the iron and also you’ll see an emphasis on getting the CG as little as doable. Membership Design 101 tells us that robust lofts with no low CG equals unplayable low bullets. Robust lofts with a low CG equal playable distance. Whereas its launch and descent angle have been among the many lowest within the take a look at, a forty five.9-degree descent angle with a 7-iron is eminently playable.
Moreover, the Ram Axials utilized in our take a look at function the KBS Tour-V shaft which, whereas on the lighter facet, do are typically lower-launching and lower-spinning. The KBS Tour 90 is a barely lighter, higher-launching and higher-spinning possibility that Ram gives at no upcharge. The KBS Tour Lite and Nippon N.S. Professional 950GH are upcharge choices that may additionally improve launch and spin in comparison with the Tour-V.
The becoming query
As at all times, MyGolfSpy recommends being fitted for irons. Sadly, {custom} becoming may be unimaginable with DTC manufacturers. An over-the-phone session with somebody who is aware of what they’re speaking about may be efficient. Nobody, nevertheless, would recommend it’s an equal substitute.
Most fitters will concede {that a} becoming is transferable, supplied it’s in the identical class. Meaning in case you have been fitted for a Callaway Apex Professional, your size, lie and shaft specs may be utilized to a special iron head in the identical class.
“We’re assembling right here in Nevada,” says Millington. “We’re including extra shaft and grip choices and providing size, lie and loft changes. We even have grasp membership builders doing the work moderately than individuals simply placing glue on and sticking issues collectively.”
Widespread criticisms one hears about DTC manufacturers are “It appears similar to …,” or “appears like they simply copied …”
You recognize, these are in all probability spot-on. In spite of everything, lots of single-piece solid golf golf equipment seem like lots of different single-piece solid golf golf equipment. All of them have a hosel, a face, rating strains, a sole and a few type of milling to create a completed product. Similarities are inevitable however we’ve mentioned it right here many occasions earlier than: Much like shouldn’t be identical as neither is it copy of.
“All the things we do now’s just about our personal design,” says Millington. “With Gavin and Larry, we’re placing in much more work than you’d count on from an organization our dimension.
“It’s costly, too. The device on every iron set is not less than $40,000. We have now 4 new iron units popping out and we’re going to do all of them in left-handed as properly. And now we have Hogan and MacGregor in addition to Ram. That may run into half one million {dollars} simply.”
Are the Ram Axial Solid irons for you?
In case you insist on an in-person {custom} becoming for these particular irons, that one’s a straightforward “no.” Whereas Millington’s Ben Hogan model gives a demo program, neither Ram nor MacGregor has one at this level. You’ll be able to, nevertheless, simply buy iron heads and construct your individual in case you’re so inclined.
As talked about, the custom-fitting query canine all DTC manufacturers. Customized becoming is important if you wish to play your finest golf. However in case you’re balling on a price range, you’re going to should make selections. The attraction is massive OEM-level efficiency at a fraction of the value. The Ram Axial Solid irons will run you $450 for a 5-PW set with no-upcharge shafts and grips.
That’s onerous to withstand.
When you’ve got been {custom} fitted, that becoming will as a rule translate seamlessly to a different membership that’s in the identical class. In case you’ve been {custom} fitted right into a COBRA KING Tour participant’s iron with a KBS Tour Lite shaft at COBRA’s commonplace size and lie. You’ll be able to simply transition right into a Ram Axial Solid, MacGregor MT Milled or MT-Professional, Sub 70 659 CB or TC or a Maltby TE+ constructed to the identical specs and be fairly assured.
“All of them work,” says Millington. “You may not hit one so far as the opposite otherwise you may not hit one as straight as the opposite however all of them work.”
This text was written in partnership with RAM.
The publish How The Ram Axial Solid Shocked Us All appeared first on MyGolfSpy.
